Kiln Heater

We would like to propose suitable heater with all of our accumulated technology and knowledge as a firing furnace manufacturer. and high mechanical strength.

Catalog: 
icon bytes

SiC Heater (Working temperature: 400°C - 1400°C)

Silicon carbide based nonmetallic heating element

  • Keep clean environment inside the furnace.
  • Simple to use and easy maintenance.
  • Suitable for various special atmospheres.
Coating type
Coating will protect the heater from rapid degradation at server furnace atmosphere, such as vapor and reduction.
Coating material is CVD, alumina, glass and so on.
Soaking type
Center of the heating element will not heat. Therefore, uniform heating at which direction is possible. This type is effective for wide continuous furnace.
Protecting tube attached type
Protecting tube will prevent the heater from oxygen and alkali which isoccurred from firing products.
Material of protecting tube is alumina, mullite, SiC and so on.

 

Metallic Heater (Working temperature: -1000°C)

Insulation material and heating element combined heater unit

  • Miniaturization and high efficiency of firing furnace is realized.
  • Uniform heating is possible by heating from entire surface.
Closed type
Heater is buried in insulation material and will not connect to the furnace atmosphere directly. It will keep long life time even in the use of special atmosphere. Clean environment inside the furnace is realized.

 

MoSi2 Heater (Working temperature: 1000°C - 1800°C)

Two silification molybdenum based heater for high temperature

  • Use at high temperature range.
  • Proposal of shapes which meets the requirement.
High purity type
High purity material is used for this heater. It will extend the life time of glass protection film which is formed at the surface of heating element. It has an effect for creep feature and mechanical strength.